# Inside MIL-PRF-46374G, the US Military's Wristwatch Specification, and the Affordable Movements That Meet It on Paper

> The Defense Department's general-purpose wristwatch standard turns 27 on November 12. We read it clause by clause and checked seven current movements against the four requirements a buyer can compare from a spec sheet.

URL: https://wristmetric.com/culture/mil-prf-46374g-military-watch-spec-explained
Section: Watch Culture
Published: November 11, 2026
By: Wristmetric Staff
Brands: Orient, Seiko, Citizen, Hamilton, Timex

MIL-PRF-46374G, the US Defense Department's performance specification for a general-purpose wristwatch, is dated November 12, 1999. For a mechanical watch it asks for at least 36 hours of running on a full wind, at least 15 jewels, a seconds hand that stops when the crown is pulled, and a daily rate within ±30 seconds at room temperature.

Those four lines are the parts of the document a buyer can check against a modern spec sheet, and they are what we checked. The rest of the 21-page document is about vibration, drop tests, salt fog, lactic acid and radioactive paint, which no maker of a $300 watch publishes results for. The specification is approved for all departments and agencies of the Department of Defense, and EverySpec, the public archive of military standards, lists it as active, with one notice added in December 2007.

It replaced MIL-W-46374F, dated October 14, 1991, after 2,951 days. On Veterans Day 2026 the G revision is a day short of 27 years old.

## What kind of watch does MIL-PRF-46374G describe?

An analog watch that a soldier can read through a whole night without pressing anything. That is the spec's own definition of its scope, watches "intended to be continuously read, without any action required on the part of the wearer, for periods in excess of 8 hours in low or no light situations."

It defines three types. Type I is a short-life watch, two years, not meant to be repaired. Types II and III are long-life watches of 5 to 10 years, maintainable, rated for high altitude and corrosion, and Type III adds a rotating elapsed-time ring for bomber pilots and navigators on long flights. Each type can be ordered in four classes, three battery-powered [quartz](https://wristmetric.com/buying-guides/seven-watches-that-make-a-strong-case-against-quartz) classes that differ in how the battery is shipped, and Class 4, a mechanical movement with no battery.

The design clause is short and specific. The dial is black with white numerals 1 to 12, with a smaller ring of 13 to 24 inside them. The 13 sits by the 1 and the 24 by the 12. The strap is black. The case finish is dull and non-reflective, in silvery metal or black. And "Manufacturer symbols or identification shall not appear on the dial."

> The military's own spec says of its night-reading requirement that "No commercial equivalent exists."

That line comes from the spec's notes section, which calls the watch "military unique" because it must be readable after 8 hours in total darkness with no button press. The test is precise. After 8 hours in the dark, an observer with 20/20 vision, adapted to the dark, must be able to read it at no closer than 12 inches (30.5cm). Section 3.6 then sets contamination and leak limits that apply "only if nuclear material is present", and the caseback marking table has a line for millicuries. Ordinary luminous paint, charged by light, fades as the night goes on.

## What does it ask of a mechanical movement?

Four things a spec sheet can answer, and several it cannot. Here they are as the document words them, for the long-life Type II and III watches in Class 4.

- **Power reserve.** "When fully wound, the mainspring shall drive the complete movement a minimum of 36 hours without rewinding."
- **Jewels.** "15 or more functional jewel bearings" at the points of greatest friction and wear.
- **Hacking.** Pulling the crown to the setting position "shall result in stopping the movement", so the hands can be set to the second. Watch buyers call this hacking.
- **Accuracy.** A mean daily rate of no more than ±30 seconds at 75°F (23.9°C), and ±60 seconds at 40°F and at 125°F, measured dial-up and crown-down after the full set of environmental tests.

The spec also limits isochronism, the change in rate as the mainspring runs down, to 5 seconds between 6-hour readings over 24 hours. Over a 90-day qualification run, interrupted by vibration and shock tests at day 30 and day 60, the average rate must stay within 36 seconds a day.

Quartz classes get tighter numbers. A battery watch must hold ±0.7 seconds a day at 75°F, which works out to about 21 seconds in a 30-day month, and must run at least 2.5 years on one battery.

## Which current movements meet it on paper?

We took seven movements found in watches we have covered, used the makers' own published figures, and checked each against the four Class 4 lines. This is a paper check, not a test. The spec measures a finished watch after shock, vibration, cold, heat and magnetism. A maker's published tolerance is measured under its own conditions, so a movement inside the spec's number on paper has not passed the spec.

| Movement | Example watch and US price | Reserve (spec 36h or more) | Jewels (spec 15 or more) | Hacking | Maker's rated accuracy (spec within ±30 s/day) |
|---|---|---|---|---|---|
| Orient F6922 | Orient Kamasu, $375 at Orient Watch USA | About 40h | 22 | Yes | +25/−15 s/day, inside |
| Orient F6724 | Orient Bambino, from $255 | About 40h | 22 | Yes | +25/−15 s/day, inside |
| Orient F6N43 | Orient Star Contemporary Index, $560 | About 50h | Not checked | Yes | +25/−15 s/day, inside |
| Seiko 4R35 | Seiko Presage Cocktail Time SRPE41, $450 | About 41h | 23 | Yes | +45/−35 s/day, outside |
| Citizen 8210 | Citizen Tsuyosa NJ0150-56E, $495 | About 42h | 21 | Yes | −20/+40 s/day, outside |
| Miyota 8215 | Timex Marlin Automatic TW2V44600, $299 | About 42h | 21 | Yes | −20/+40 s/day, outside |
| Hamilton H-50 | Hamilton Khaki Field Mechanical 38, $675 | 80h | 17 | Yes | Not published |

Requirements from MIL-PRF-46374G, sections 3.4.2.1, 3.4.3.2 and table III (Types II and III, Class 4). Movement figures from the makers' product pages, user guides and movement pages, as recorded in our research notes. Our compilation.

All seven clear the reserve, jewel and hacking lines. The difference is accuracy. [Orient](https://wristmetric.com/brands/orient) rates its in-house [F6922](https://wristmetric.com/culture/inside-orients-in-house-mechanical-movements) and F6724 at +25/−15 seconds a day, and both ends of that range sit inside ±30. [Seiko](https://wristmetric.com/brands/seiko)'s 4R35 and the two 82-series calibers from [Citizen](https://wristmetric.com/brands/citizen) and its movement arm Miyota are rated to gain up to 40 or 45 seconds a day, which is outside it.

[Hamilton](https://wristmetric.com/brands/hamilton)'s H-50 is the most military of the seven in spirit. It is hand-wound, which matches the spec's "stem wound" mainspring most literally, and its 80-hour reserve is more than double the 36-hour minimum. Hamilton does not publish an accuracy figure for it, so the last column stays blank. We reviewed the [Khaki Field Mechanical 38](https://wristmetric.com/reviews/hamilton-khaki-field-mechanical-38-review) on October 3.

## How do the makers' ratings compare with the military's test?

Not directly, and that matters more than the table. The spec's ±30 is a mean daily rate in two positions on a finished watch after environmental stress. Makers' ranges are tolerances for a movement, and they describe the worst a new watch can do and still be in specification. Most run well inside them. Our [guide to accuracy ratings](https://wristmetric.com/culture/watch-accuracy-ratings-explained) turns the same tolerances into drift per week and month.

What the comparison does show is how the makers choose to describe their own movements. A ±30 requirement was written in 1999 with real watches in mind. Twenty-seven years later, the only movements in our set whose makers publish a rating that fits inside it are Orient's, in watches from $255.

The quartz line is easier to meet. Orient's solar quartz diver is rated at ±20 seconds a month on Orient's global site, Seiko's solar Prospex SNE549 at ±15 a month, and Citizen's Eco-Drive E168 at ±15 a month in its manual. All three are inside the spec's roughly 21 seconds a month. [Solar watches](https://wristmetric.com/culture/how-long-solar-watches-run-in-the-dark) have no battery to change, so the 2.5-year battery clause does not apply in the same way.

## What the spec does not ask for

No minimum case size, no sapphire crystal, no date and no particular depth. The water tests are five minutes at one atmosphere and five at three, plus 24 hours submerged in about ten times the watch's volume of water at room temperature. The crystal must survive a strength test and stay clear after storage at −50°F and 140°F.

The next document date to watch is not a revision of this spec. It is the next qualified products list. MIL-PRF-46374G allows contracts only for watches already approved for that list, so the specification sets the bar, and the list says who has cleared it.

Prices are US dollars as charged by the maker at publication. Verify specifications with the manufacturer before buying. Editorial policy: https://wristmetric.com/editorial-policy/
